SPIN Hot Dip Versus Traditional Centrifuge Dryer
Dubai-UAE: 25 March 2013 - SPIN Hot Dip Galvanizing, a process of efficiently coating metal with zinc, that has been incredibly successful in the West for corrosion resistance, was recently launched in Dubai, UAE by Marami Metal Plating.
Previously, galvanizers, after coating threaded components - such as fasteners, jack bolts and more - would transfer these components from the hot kettle (ca. 500 degrees Celsius) to a centrifuge dryer, which causes significant cooling-off, resulting in the clogging of threads which requires manual re-threading that wastes time and money.
Furthermore, if over-grinding takes place during the manual re-threading process, the performance and life of that particular component would decrease significantly.
With the new SPIN process however, as soon as the aforementioned components are removed from the kettle, they are spun in molten state at a very high velocity over the kettle itself, resulting in: very good corrosion protection; very clean threads with very good fit; even zinc coating; no subsequent cutting of thread; and no zinc clogs or zinc runners. In other words, the material is ready for use.
Rajeev Daswani, Managing Director, Marami Metal Plating, said: "We had launched the SPIN Hot Dip Galvanizing system a little over a year ago and have seen significant improvements in the quality of each individual component. One of the main challenges we faced with the traditional centrifuge process was Icing - the accumulation of zinc due to cooling. Where we would have 20 per cent Icing using the traditional means, we now have 0.1 per cent icing with the SPIN Hot Dip Galvanizing system."
In addition to being the first and one of the very few organizations to provide the SPIN Hot Dip Galvanizing process in the Middle East, Marami Metal Plating has a team that has special designs in place for all types of materials and can also fabricate and design baskets based on each client's unique requirement.
Marami Metal Plating is a complete Metal Service Center (MSC) with approximately 18 years of experience in industrial plating and works with highly reputable organizations and multinationals in the construction, petroleum, marine and industrial industries.
Marami system features include: complete hard chrome plating setup; complete SPIN Hot Dip Galvanizing system (a pioneering system in the region); complete Electro-Galvanizing setup; complete Electroless Nickel plating setup; complete Nickel Sulfamate, tin plating and copper plating setups; complete Manganese & Zinc Phosphate and Black Oxidizing setups; and machine shop with lathes, grinders, welding and polishing systems.
-Ends-
For media inquiries, please contact:
The Public Relations Company
Kay Braganza
Consultant
kay.braganza@tprc.ae
Tel: +971 50 7681684
© Press Release 2013
